Qos Trust (Global) - 3Com 3CRUS2475 Command Reference Manual

140 C 9: Q
HAPTER O

qos trust (Global)

S C
OMMANDS
Default Configuration
The following table describes the default map.
DSCP 0-7
value
Queu 1
e-ID
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
Console(config)# qos map dscp-queue 33 40 41 to 1
The qos trust Global Configuration mode command configures the
system to the basic mode and trust state. To return to the untrusted state,
use the no form of this command.
Syntax
qos trust {cos | dscp}
no qos trust
Parameters
cos — Indicates that ingress packets are classified with packet CoS
■
values. Untagged packets are classified with the default port CoS
value.
dscp — Indicates that ingress packets are classified with packet DSCP
■
values.
Default Configuration
CoS is the default trust mode.
8-15 16-23 24-31
2 3 4
32-39 40-47 48-56
5 6 7
57-63
8