Spanning-Tree Mst Configuration - 3Com 3CRUS2475 Command Reference Manual

spanning-tree mst
configuration
Fast Ethernet (100 Mbps)
Ethernet (10 Mbps)
Command Modes
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the MSTP instance 1 path cost for
Ethernet port 9 to 4.
Console(config) # interface ethernet 9
Console(config-if) # spanning-tree mst 1 cost 4
The spanning-tree mst configuration Global Configuration mode
command enables configuring an MST region by entering the Multiple
Spanning Tree (MST) mode.
Syntax

spanning-tree mst configuration

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
All devices in an MST region must have the same VLAN mapping,
configuration revision number and name.
Example
The following example configures an MST region.
Console(config)# spanning-tree mst configuration
Console(config-mst)#
spanning-tree mst configuration
200,000 19
2,000,000 100
223