Debug-Mode - 3Com 3CRUS2475 Command Reference Manual

debug-mode

441
no terminal data-dump
Default Configuration
Dumping is disabled.
Command Mode
User EXEC mode
User Guidelines
By default, a More prompt is displayed when the output contains more
lines than can be displayed on the screen. Pressing the Enter key displays
the next line; pressing the Spacebar displays the next screen of output.
The data-dump command enables dumping all output immediately after
entering the show command.
This command is relevant only for the current session.
Example
This example dumps all output immediately after entering a show
command.
Console> terminal data-dump
debug-mode
The debug-mode Privileged EXEC Command mode switches to debug mode.
Syntax
debug-mode
Default Configuration
This command has no default configuration.
Command Mode
Privilaged EXEC