3Com 3CRUS2475 Command Reference Manual page 69

Syntax
show bridge address-table count [vlan vlan] [ethernet
interface-number | port-channel port-channel-number]
Parameters
vlan — Specifies a valid VLAN, such as VLAN 1.
■
interface — A valid Ethernet port.
■
port-channel-number — A valid port-channel number.
■
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the number of addresses present in all VLANs are
displayed.
Console# show bridge address-table count
Capacity: 8192
Free: 8083
Used: 109
Secure addresses: 2
Static addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show bridge address-table count 69