Mac-Filtering Action - 3Com 3CRUS2475 Command Reference Manual

mac-filtering action

no load-balancing
Parameters
association — Load balancing calculations are performed when a
■
station attempts to associate with an AP in the ESS. The associating
station can be moved to an adjacent AP in the ESS prior to association.
periodically — Load balancing calculations are performed at a fixed
■
interval for all APs in an ESS. Stations are moved to suitable APs in the
ESS based on load balancing calculations.
ssid — The ESS SSID string. (Range: 1-32 characters)
■
Default Configuration
Disabled.
Command Mode
ESS Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables load balancing in an ESS where a station
attempts to associate with an AP in the ESS.
Console (Config)# wlan ess configure ssid enterprise
Console (Config-ess)# load-balancing association
The mac-filtering action ESS Configuration mode command enables
source MAC address filtering in an ESS. To disable source MAC address
filtering, use the no form of this command.
Syntax
mac-filtering action {permit | deny}
no mac-filtering action
Parameters
permit — Permit only stations where their MAC address is in the
■
MAC-address-filtering list.
mac-filtering action 335