Logging On - 3Com 3CRUS2475 Command Reference Manual

28
S C
YSLOG OMMANDS

logging on

The logging on Global Configuration mode command controls error
message logging. This command sends debug or error messages to a
logging process, which logs messages to designated locations
asynchronously to the process that generated the messages. To disable
the logging process, use the no form of this command.
Syntax
logging on
no logging on
Default Configuration
Logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the distribution of logging messages at
various destinations, such as the logging buffer, logging file or syslog
server. Logging on and off at these destinations can be individually
configured using the logging buffered, logging file, and logging
Global Configuration mode commands. However, if the logging on
command is disabled, no messages are sent to these destinations. Only
the console receives messages.
Example
The following example enables logging error messages.
Console(config)# logging on