Show Qos Aggregate-Policer - 3Com 3CRUS2475 Command Reference Manual

show qos
aggregate-policer
Define an aggregate policer if the policer is shared with multiple classes.
Policers in one port cannot be shared with other policers in another
device; traffic from two different ports can be aggregated for policing
purposes.
An aggregate policer can be applied to multiple classes in the same policy
map; An aggregate policer cannot be applied across multiple policy maps.
This policer can also be used in Cascade police to make a cascade policer.
An aggregate policer cannot be deleted if it is being used in a policy map.
The no police aggregate Policy-map Class Configuration command
must first be used to delete the aggregate policer from all policy maps.
Policing uses a token bucket algorithm. CIR represents the speed with
which the token is removed from the bucket. CBS represents the depth of
the bucket.
Example
The following example defines the parameters of a policer called
'policer1' that can be applied to multiple classes in the same policy map.
When the average traffic rate exceeds 124,000 bps or the normal burst
size exceeds 96000 bps, the packet is dropped.
Console (config)# qos aggregate-policer policer1 124000 96000
exceed-action drop
The show qos aggregate-policer Privileged EXEC mode command
displays the aggregate policer parameter.
Syntax
show qos aggregate-policer [aggregate-policer-name]
Parameters
aggregate-policer-name — Specifies the name of the aggregate
■
policer to be displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode

show qos aggregate-policer

129