Wlan Tx-Power Auto Interval - 3Com 3CRUS2475 Command Reference Manual

wlan tx-power auto
interval
User Guidelines
The Auto Transmit Power algorithm adjusts the transmit power of APs, so
the signal strength heard at the second-closest access point is as close as
possible to the target signal-strength configured by the wlan tx-power
auto signal-strength Global Configuration command.
Example
The following example enables Auto Transmit Power.
Console (config)# wlan tx-power auto enable
The wlan tx-power auto interval Global Configuration mode
command configures the recalculation Auto Transmit Power period. To
restore defaults, use the no form of this command.
Syntax
wlan tx-power auto interval minutes
no wlan tx-power auto interval
Parameters
minutes — Specifies the recalculation period, in minutes. (Range:
■
1–15000 minutes)
Default Configuration
The default recalculation period is 10 minutes.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the recalculation Auto Transmit Power
period to 1200 minutes.
Console (config)# wlan tx-power auto interval 1200

wlan tx-power auto interval

505