Switchport Forbidden Vlan - 3Com 3CRUS2475 Command Reference Manual
Unified gigabit wireless poe switch 24
Hide thumbs
Also See for 3CRUS2475:
- Quick start manual (40 pages) ,
- Declaration of conformity (1 page) ,
- User manual (333 pages)
Table of Contents
Advertisement
464
C
33: VLAN C
HAPTER
switchport
forbidden vlan
OMMANDS
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1 to discard untagged
frames at ingress.
Console(config)# interface ethernet 1
Console(config-if)# switchport mode general
Console(config-if)# switchport general acceptable-frame-type
tagged-only
The switchport forbidden vlan Interface Configuration mode
command forbids adding specific VLANs to a port. To restore the default
configuration, use the remove parameter for this command.
Syntax
switchport forbidden vlan {add vlan-list | remove vlan-list}
Parameters
add vlan-list — Specifies the list of VLAN IDs to be added. Separate
■
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
remove vlan-list — Specifies the list of VLAN IDs to be removed.
■
Separate nonconsecutive VLAN IDs with a comma and no spaces. A
hyphen designates a range of IDs.
Default Configuration
Hide quick links:
Advertisement
Table of Contents
