Bridge Multicast Forbidden Forward-All - 3Com 3CRUS2475 Command Reference Manual

60 C 4: A
HAPTER DDRESS
bridge multicast
forbidden
forward-all
T C
ABLE OMMANDS
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list |
port-channel port-channel-number-list}
no bridge multicast forward-all
Parameters
add — Force forwarding all multicast packets.
■
remove — Do not force forwarding all multicast packets.
■
interface-list — Separate nonconsecutive Ethernet ports with a
■
comma and no spaces; a hyphen is used to designate a range of ports.
port-channel-number-list — Separates nonconsecutive port-channels
■
with a comma and no spaces; a hyphen is used to designate a range
of port-channels.
Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all multicast packets on port 8 are forwarded.
Console(config)# interface vlan 2
Console(config-if)# bridge multicast forward-all add
ethernet g8
The bridge multicast forbidden forward-all Interface Configuration
(VLAN) mode command forbids a port to be a forward-all-multicast port.
To restore the default configuration, use the no form of this command.