3Com 3CRUS2475 Command Reference Manual page 42

42 C 3: ACL C
HAPTER OMMANDS
Syntax
permit {any | protocol} {any | {source source-wildcard}} {any |
{destination destination-wildcard}} [dscp dscp number | ip-precedence
ip-precedence]
permit-icmp {any | {source source-wildcard}} {any | {destination
destination-wildcard}} {any | icmp-type} {any | icmp-code} [dscp number |
ip-precedence number]
permit-igmp {any | {source source-wildcard}} {any | {destination
destination-wildcard}} {any | igmp-type} [dscp number | ip-precedence
number]
permit-tcp {any | {source source-wildcard}} {any | source-port} {any
|{destination destination-wildcard}} {any | destination-port} [dscp number
| ip-precedence number] [flags list-of-flags]
permit-udp {any | {source source-wildcard}} {any | source-port} {any |
{destination destination-wildcard}} {any | destination-port} [dscp number
| ip-precedence number]
Parameters
source — Specifies the source IP address of the packet. Specify any to
■
indicate IP address 0.0.0.0 and mask 255.255.255.255.
source-wildcard — Specifies wildcard to be applied to the source IP
■
address. Use 1s in bit positions to be ignored. Specify any to indicate
IP address 0.0.0.0 and mask 255.255.255.255.
destination — Specifies the destination IP address of the packet.
■
Specify any to indicate IP address 0.0.0.0 and mask 255.255.255.255.
destination-wildcard — Specifies wildcard to be applied to the
■
destination IP address. Use 1s in bit positions to be ignored. Specify
any to indicate IP address 0.0.0.0 and mask 255.255.255.255.
protocol — Specifies the abbreviated name or number of an IP
■
protocol. (Range: 0-255)