Maintenance And Troubleshooting; Cleaning The Human-Machine Interface (Hmi) - Ametek 993X Manual

Maintenance and Troubleshooting

Cleaning the Human-Machine Interface (HMI)

Clean the graphic panel on the HMI regularly to avoid dust build-up. When
cleaning the graphic panel, power to the HMI (analyzer) must be OFF. Using a
damp cloth to avoid electrostatic discharge, wipe the graphic display panel.
PN 903-8820, Rev A
Before performing any maintenance on the analyzer, test the area
around the analyzer for flammable gases and proceed only when the
area is found to be safe.
|
EH&S 57