Footswitch; Retcam 3 Control Panel; Keyboard Controls; Video Playback - Clarity RetCam3 User Manual

Use the [S] key on the computer keyboard to snap (start or pause video capture) images
(see
page

Footswitch

Displaying the Exam Capture screen automatically enables the footswitch. The footswitch
controls work the same way as the image capture controls.
Toggle
button, or the [S] key, to record, pause, and restart video recording or capture a still image.

RetCam 3 Control Panel

Select one or more options from the onscreen image capture controls
page
then press the green Snap button on the control panel to start or pause video recording or
to capture images.

Keyboard Controls

Use the space bar to record and pause the video during live imaging. Press the [S] key to
capture still images.

Video Playback

When you stop live recording, select a video to enable the playback controls. Thumbnails
of video clips show four (4) images (first, last, and two intermediate images in the video) in
the quadrants of a square.
RetCam 3 and RetCam Shuttle User Manual
Labels and Symbols on page 40
64).
NOTE
Saving video consumes a great deal of disc space. To maintain optimal
system performance, select the images of interest from the video by clicking
or pressing the [S] key during review, then delete the video prior to
exiting Image Capture. By default, videos are marked
or
86), adjust the focus and intensity using the control panel
NOTE
If the Control Panel controls are unresponsive, verify that the Footswitch
Controls are not activated.
Using the RetCam System
and Preparing the RetCam 3 System for Use on
to or . Next, use the footswitch Snap
89
for deletion.
(Figure 70 on
(Figure 34 on page 64),
PN 18-000393 Rev. A