66
Chapter 4
Figure 37 Handpiece Connections
Always return the handpiece to the holster when it is not in use. Drape the handpiece
cable over the cord wrap post, but do not wrap it tightly because damage to the fiber optic
cable might result.
Printer Setup
Extend the printer shelf fully and verify that sufficient paper is installed in the printer. Lift
printer lid to ensure ink cartridges are installed. Push the shelf back in.
System Software
When the software is ready, the User Login screen appears.
Figure 38 User Login Screen
Enter the username and password assigned by your RetCam Administrator.
RetCam 3 and RetCam Shuttle User Manual
Preparing the System for Use
(Figure 38 on page
66).
PN 18-000393 Rev. A