Synchronization With Retcam Review Software (Rcrs); Determining If Retcam Is Configured For Rcrs; Figure 27 Server Connection Status - Clarity RetCam3 User Manual

3
Synchronization with RetCam
Review Software (RCRS)
The features described in this section are available only if the RetCam System is
configured for use with RCRS™.
You can synchronize your RetCam with RCRS to provide storage, retrieval, annotating,
and viewing of ophthalmic images.
•
•
•
•

Determining if RetCam is Configured for RCRS

To determine if the RetCam System is configured for use with RCRS, look in the
upper right corner of the Patients and Exams screen and find
button is blue, as shown, the system is configured for use with RCRS.
To determine if the RetCam system is currently connected to RCRS, look in the bottom
right corner of the Patients and Exams screen and observe the Server Connection status
(Figure 27 on page

Figure 27 Server Connection Status

When the Server Connection status indicates "Connected to server (server name)," the
RetCam System is ready for synchronization. If the RetCam system is configured for use
with RCRS, but not currently connected, simply connect a shielded RJ-45 connector Cat5
or Cat6 network cable. The RetCam System automatically detects the network connection
to RCRS.
RetCam 3 and RetCam Shuttle User Manual

Synchronization with RetCam Review Software (RCRS)

Determining if RetCam is Configured for RCRS on page 55
Synchronization with RCRS on page 56
Reconciling Data Mismatches on page 58
Removing Videos and Images from the RetCam System on page 60
55).
Never connect the RetCam System to a network or any externally powered
devices or peripherals during imaging.
55
. If the Sync
PN 18-000393 Rev. A