Storage; Transport; To Relocate The System Within A Building; Figure 13 Shuttle With All Items Stowed - Clarity RetCam3 User Manual

Storage

For storage of the system when not in use, disconnect the power cord and store it in one
of the storage boxes. Stow the handpiece in its compartment behind the upper door and
the footswitch in its compartment behind the lower door. Remove all loose objects from the
work surfaces. Close the notebook computer and consider removing it to a secure
location. Wipe the surfaces with a soft cloth. Apply the brakes to all casters to keep it in
place.

Figure 13 Shuttle With All Items Stowed

Transport

The system is designed to be transportable, both within and between hospitals, clinics and
offices.

To relocate the system within a building:

1. Power down the system through the software by selecting
2. Switch OFF mains power on the back of the unit. Unplug the power cord from the wall
outlet and drape it over the transport handle.
3. Secure the handpiece inside the storage compartment.
4. Ensure the notebook is secured to cart or removed for transport to avoid damage if
dropped.
5. Unlock the caster brakes.
6. Gently roll the system on all four casters to the new location. Move the system slowly
to minimize vibration. Once in the new location, apply the caster brakes, plug in the
power cord, and restart the system.
RetCam 3 and RetCam Shuttle User Manual
NOTE
The system has no internal power supply (no battery) to support image
acquisition when disconnected from a wall outlet. (The notebook computer
can operate using its own battery.)
Introduction 33
and then Shutdown.
PN 18-000393 Rev. A