Retcam Shuttle Illumination Lamp Replacement; Figure 154 Removing The Fuse Holder; Figure 155 Blown Fuse Removed - Clarity RetCam3 User Manual

Figure 154 Removing the Fuse Holder

Cover open
3. Remove the blown fuse from the fuse holder
with a new fuse of same type and rating. Reinsert the fuse holder.

Figure 155 Blown Fuse Removed

Replacement fuses are available from Clarity Technical Services.

RetCam Shuttle Illumination Lamp Replacement

RetCam 3 and RetCam Shuttle User Manual
Gently pry at edges
For continued protection against risk of fire, replace only with same type and
rating fuse.
Appropriately shutdown and unplug the unit to allow the bulb to cool before
replacing it.
NOTE
Replacement bulbs are available from Clarity Technical Services.
Maintenance and Support
Finish removal with fingers
(Figure 155 on page 161) and replace it
PN 18-000393 Rev. A
161