Locating Still Images From Video; Changing Image Capture Options During An Exam; Figure 75 Video Scrollbar Control - Clarity RetCam3 User Manual

Locating Still Images From Video

During video replay, you can identify and save still images from the exam. There are two
ways to locate and save a still image.
1. Use the scrollbar at the top of the video controls to scroll through the video to find a
frame.

Figure 75 Video Scrollbar Control

• Move the slider to the right or left to scroll forward or back through the video.
• Stop the slider when you see an image you want to save.
• Click
2. Use the playback controls at the top of the screen to locate a still image:
• Start playback by clicking Play
• Click Pause
• Click

Changing Image Capture Options During an Exam

Before you start imaging, verify that the options displayed for eye, image type, and lens
piece are correct. If necessary, edit options from the image capture screen.
RetCam 3 and RetCam Shuttle User Manual
(or press [S] on the keyboard or press the Snap button on the control
panel or the footswitch).
NOTE
To capture still images from video, ensure the
capturing still images.
frame back, click .
when you see an image you want to save.
(or press [S] on the keyboard or press the Snap button on the control
panel or the footswitch).
NOTE
To capture still images from video, ensure the
capturing still images.
Using the RetCam System
or Forward one frame
91
is configured for
. To move the video one
is configured for
PN 18-000393 Rev. A