Retcam System Software Configuration; Configuring The Retcam System For Use With Optional Retcam Review Software - Clarity RetCam3 User Manual

2
RetCam System Software
Configuration
This chapter explains how to configure the RetCam Ophthalmic Imaging System software,
after the RetCam System is properly installed at your site. The activities described include:
•
•
•
•
Configuring the RetCam System for Use with the Optional RetCam
Review Software
RetCam Review Software (RCRS™) is a separate Clarity product. RCRS provides a
facility to store and access patient data and images over the Internet. RCRS is designed
to communicate with RetCam 3 or RetCam Shuttle Ophthalmic Imaging Systems, running
software version 6.0 or above.
If your institution has purchased RCRS, Clarity recommends that you install and configure
RCRS before you configure the RetCam 3 or RetCam Shuttle system. When you
configure the RetCam 3 or RetCam Shuttle for use with RCRS, certain administrative
functions are managed exclusively on the RCRS application. See
RetCam Review Software on page
Customers who purchase RCRS receive additional instructions and support tools with
detailed instructions for RCRS configuration, preparation, functionality, and use.
RetCam 3 and RetCam Shuttle User Manual
Configuring the RetCam System for Use with the Optional RetCam Review Software
on page 45
Functions Managed by RetCam Review Software on page 47
Creating User Login Accounts on page 50
Assigning Patients to Domains on page 51
NOTE
If you do not have the optional RCRS product, go directly to
Domains on page 47
NOTE
Some configurations options require RetCam Administrator privileges.

RetCam System Software Configuration

to begin configuring your RetCam System.
47.
45
Creating
Functions Managed by
PN 18-000393 Rev. A