To replace the RetCam 3 fuse:
1. Using a flat blade screwdriver, gently pry open the cover of the fuse holder at the top of
the power entry module. (See
Figure 143 Opening the Fuse Holder Cover
2. Remove the fuse holder. (See
Figure 144 Removing the Fuse Holder
3. Remove the blown fuse or fuses from the fuse holder, and replace it with a new fuse of
same type and rating. (See
RetCam 3 and RetCam Shuttle User Manual
Maintenance and Support
Figure 143 on page
155.)
Figure 144 on page
155).
Figure 145 on page
156.) Re-insert the fuse holder.
155
PN 18-000393 Rev. A