Figure 62 New Exam Configuration Screen - Clarity RetCam3 User Manual

82 Chapter 5
To start a new exam:
1. Highlight the desired patient record on the Patients and Exams screen.
2. Click
3. Select either one of the Preset Configurations, or the Manual Configuration. Note
that any of the preset configurations are easily editable.

Figure 62 New Exam Configuration Screen

To edit any of the Preset Configurations:
4. Select the Edit hyperlink, located below the green arrow for the preset configuration
that you want to edit.
5. In the resulting dialog box
configuration and any of its four components as outlined:
RetCam 3 and RetCam Shuttle User Manual
. Alternatively, click
NOTE
The Current Weight field (shown in
when the patient is less than one year old.
NOTE
The New Exam Configuration screen displays the storage capacity of the
system hard drive ( Figure 62 on page
can be saved is affected by saving a combination of videos and stills and by
saving images with annotations.
(Figure 63 on page
Using the RetCam System
to the left of a patient ID.
Figure 62 on page 82) appears only
82). The total number of images that
83), you can edit the name of the
PN 18-000393 Rev. A