22 Using the RetCam 3
+
RetCam3 User Manual
1. To turn OFF the system (leaving the Stand-by Ready) hover over the red
Shutdown button at the bottom of the Patients and Exams screen.
Figure 7 Shutdown button
The shutdown options screen appears. Select Shutdown Computer.
2. If the system stops responding, wait at least one minute because it may be
busy. If the system does not respond after one minute, depress the System
Power button (on the Control Panel) once.
3. All Control Panel indicators except for the green AC/DC indicator will turn off.
4. If FA is available, verify that the FA light switch is OFF.
5. Remove the lens from the handpiece. Carefully inspect and clean the lens
piece. Store the lens in the lens box.
6. Return the handpiece to the holster.
7. Return the footswitch to the footswitch pocket (See
Figure 8 Footswitch pocket
Note: To re-start the system, see
Mode)
on page 19.
Using Hard Shutdown
WARNING: Do not use the hard shutdown method unless necessary because data
corruption can occur.
Figure
8).
Footswitch placed horizontally in
footswitch storage pocket.
Place footswitch cord on top of
footswitch.
Turning the System ON (from Stand-by
Shutdown button
PN 21-100375 Rev. A