Click
Click
Click
After you start the timer,
Click
the time when you stopped it.
Click the arrow at the right of any timer button to display the menu of timer options
(Figure 71 on page
Figure 71 Timer Menu Options
Click
(see Chapter 10,
monochromatic in FA mode.
A progress bar appears below the Image Capture Controls each time that you start
Record Video to capture video. It shows the time used as a percentage of the total
available time (see
Figure 72 Progress Bar
RetCam 3 and RetCam Shuttle User Manual
to return to live video (still images only).
or press the [S] key to save a still image to the hard drive.
to record the time elapsed during the exam.
appears.
, to stop the timer without resetting it. Click
87).
Starts a new timer
Pauses the current timer
Resets the current timer to 0
Sets the timer to zero and restarts it
or
to turn fluorescein angiography imaging on or off in the software
Fluorescein Angiography (RetCam 3 System) on page
Figure 72 on page
Using the RetCam System
87).
87
to re-start the timer from
135). Images are
PN 18-000393 Rev. A