System Hardware (RetCam Shuttle)
The RetCam Shuttle system consists of modules mounted in a stable, high quality
integrated mobile cart for easy, safe transport from one location to another. The four
casters allow for easy maneuverability and positioning.
on page 30
Figure 8 RetCam Shuttle Imaging System
Work surface
1. Image shown is representative only.
RetCam 3 and RetCam Shuttle User Manual
illustrate the system hardware.
Notebook Computer
Secondary
work surface
Container for
tools and supplies
Internal handpiece
storage compartment
Upper door
(open)
Footswitch
Introduction
Figure 8 on page 29
1
Transport
Handle
Lens storage box
Lower door‚
Electro-Optical (EO) box
footswitch storage
(See
Figure 44 on
page
70)
Lockable casters
PN 18-000393 Rev. A
29
and
Figure 9
Handpiece with
interchangeable
lens piece
Holster