Maintenance and Support 59
Cleaning the Rest of the System
As with any medical device, use good public health practices when handling the
equipment, based on CDC guidelines. In addition, as with typical office equipment,
a gentle wiping with a cloth moistened with mild soap and/or water is
recommended. Do not spray cleaning solutions on any part of the system.
Disposal of Materials
Dispose of waste materials according to local and national requirements. Contact
Clarity Service if additional assistance is required.
Fuse Replacement
Locate the power entry module on the lower right side of the rear of the cart. Make
sure to remove the power cord before proceeding any further. (See
Figure
42.)
Figure 42 Power Entry Module
Using a flat blade screwdriver, gently pry open the cover of the fuse holder at the top
of the power entry module. (See
Figure
43.)
Figure 43 Opening the fuse holder cover
RetCam3 User Manual
PN 21-100375 Rev. A