Using the Control Panel
Using the Control Panel
Selecting a Character Font
This printer contains resident fonts which are
accessible through the Control Panel. You can select
any one of the character fonts by pressing the FONT
switch on the Control Panel.
n Press
.
FONT
The combination of FONT indicators (A) indicates the
current character font selected, as shown on the Control
Panel.
PROGRAM
Roman
Prestige
= light is lit.
= light is out.
Note
•
You must be in PROGRAM (both FONT
indicators are off) to allow your software to
control your font selection.
28
Operating Instructions
A
Courier
Sans Serif
Script
= light is blinking.
Selecting a Character Pitch
This printer contains resident pitches which are
accessible through the Control Panel. You can select
any one of the character pitches by pressing the PITCH
switch on the Control Panel.
n Press
.
PITCH
The combination of PITCH indicators (A) indicates the
current character pitch selected, as shown on the
Control Panel.
PROGRAM
12 CPI
17 CPI
= light is lit.
= light is out.
Note
•
You must be in PROGRAM (both PITCH
indicators are off) to allow your software to
control your pitch selection.
A
10 CPI
15 CPI
= light is blinking.