Controller Specifications; Interface; Protocol; Printing Productivity - Panasonic DP-C321 Service Handbook

1-10
(Fig. 7) j0mf61006

1. 1. 20 Controller Specifications

1. 1. 20. 1 Interface

The following interfaces are integrated as standard.
• Parallel interface
• Ethernet interface
• 100Base-TX
• 10Base-T

1. 1. 20. 2 Protocol

The following protocols are used as standard.
• SMB (Server Message Block)
• TCP/IP (LPD)
• Win 95 / 98 / Me
• Win NT 4.0 / 2000 / XP : Printing data is sent directly by the lpr port.
• IPP (Internet Printing Protocol)
• NetWare
• EtherTalk

1. 1. 20. 3 Printing Productivity

FPOT is calculated by FPOT + a ("a" is the time of PDL creation time + Transmission time +
Decompose time).
Measurement Conditions at Client PC: Pentium III 500MHz/Win 98, Connection interface: Via
Win 2000 server (100Base-TX), Specified by a driver: All settings are default, Test chart:
Color SDTP-172c (P) B/W SDTP-172 (1P)
In the B/W Priority mode
PS (Color) PS (B/W)
600x600x1bit 18.5 sec or less 9.0 sec or less
In the Color Priority mode
PS (Color) PS (B/W)
600x600x1bit 16.0 sec or less 11.0 sec or less

1. 1. 20. 4 Scanning Productivity

1. 1. 20. 4. 1 Scanned Image File Formatting

There are three types of format as follows.
Document Formatting
B/W document TIFF
Gray Scale JPEG
Color document JPEG
Chapter 1 General