[Adjust Paper Type]; [Adjust Transfer Belt Unit]; [Adjust 2Nd Btr]; [Image Position] - Konica Minolta bizhub C3100i User Manual

 "[Bypass Tray Feed Method]" (P.66)
 "[Initialize NVM]" (P.66)
 "[Initialize Print Counter]" (P.67)
 "[Clear Stored Jobs]" (P.67)
 "[Clear Forms]" (P.67)
 "[Toner Cartridge]" (P.67)
"[Adjust Altitude]" (P.67)

 "[Clear Job History]" (P.67)

[Adjust Paper Type]

Select the paper type.

[Adjust Transfer Belt Unit]

If ghosting occurs with output text and images, adjust the transfer voltage. If faint ghosting occurs,
decrease the value to decrease the voltage.

[Adjust 2nd BTR]

For each paper type, adjust the transfer voltage of the transfer roll (BTR). If the colors on the print
results are mottled, increase the value to increase the voltage. If there are blank white areas or
uneven density near the bottom of the paper, decrease the value to decrease the voltage.

[Image Position]

If the print position is misaligned, adjust the image position.
[Lead/Side Registration]
For each tray, misalignment of the image position for either feed direction (lead [L] or side [S]
registration) can be adjusted numerically.
[Perpendicularity]
Image perpendicularity can be adjusted numerically.
[Print Chart]
Print a position adjustment chart. This enables you to check for any misalignment in image position.

[Adjust Fusing Unit]

Adjust the temperature of the fusing unit for each paper type. If the paper curls, lower the
temperature. If the toner does not properly adhere to the paper, raise the temperature.

[Adjust Image Quality]

Configure image quality and color correction settings.
6.10 [Maintenance]
65