About The Change Of Luminance Unit - Konica Minolta CA-100Plus Instruction Manual

3. About the change of Luminance Unit

This instrument allows you to switch the unit for the displayed luminance between "cd/m
given below.
1. Set the POWER switch to ON while holding down the MODE key.
" " will appear.
" " will be added one after another as shown.
2. Press the key before a total of sixteen asterisks appear.
Keeping the
another.
Unit before
fL
2
cd/m
The newly set luminance unit will remain unchanged until it is changed again by the above method, even if
the power is turned OFF.
* At the time of shipment, the luminance unit is set as cd/m
key held down will display as shown below, switching the luminance unit from one to
Unit after
2
→ cd/m
→ fL
2
.
32
2
" or "fL". The method is