Measurement Data Operations; Save To Pc (Obtain Measurement Data Saved In Instrument) - Konica Minolta BC-10 Plus Instruction Manual

Measurement Data Operations

Save to PC (Obtain Measurement Data Saved
in Instrument)
Import data saved in the instrument to a specifi ed destination.
Notes For this setting, make sure to copy the PC application to the PC's hard
drive before running the application.
1
Click "Save to PC".
2
In the "Browse For Folder" window, click
the save location for the data to select it,
and click "OK".
3
The data will be saved.
Also note that data saved to the instrument can
be copied directly from within the instrument's
mass storage folder.
Memo Exit the PC application if it is running.
1. Connect the instrument to a PC. An AutoPlay
dialog will be displayed. Click "Open folder to
view fi le."
2. Click the DATA folder. Folders for each
measurement date are created, and
measurement data (******.csv) and averages
(******_A.csv) are saved within. Select the
required data, and copy to the PC.
1
59