Table of Contents
Advertisement
6
How to Use the Vivo 2
For a summary description of the means of initiating and terminating the inspiratory
phase in each mode of the ventilator, please refer to 4.1 Treatment Modes.
6.1
Switch On the Vivo 2
1 Make sure that the power supply is connected.
2 Press the On/Off button.
⇒The Vivo 2 is now in standby mode
with the display turned on.
6.2
Start the Treatment
WARNING!
Risk of Asphyxia or Personal Injury
Using incorrect settings may cause personal injury or severe medical conditions, such
as hypercarbia, producing arterial acidemia.
The therapy settings shall be based on a physician's description. Changes to settings
must be made by authorized clinical personnel only.
It is possible to choose how the machine will start and stop. If you want to confirm the
starting and stopping or not, see 3.5.5.1 Device Settings, page 41
Confirm Start/Stop is set to On
Make sure that the Vivo 2 is in Standby mode.
64
How to Use the Vivo 2
User manual
Doc. 007229 D-3
Advertisement
Table of Contents
