Prepare The Vivo 2 For Use; Checking The Vivo 2 Before First Use; Placing The Vivo 2 - Breas Vivo 2 User Manual

5

Prepare the Vivo 2 for Use

5.1

Checking the Vivo 2 before First Use

Before using the Vivo 2, perform the following checks.
1 Ensure that you have the equipment mentioned in 3.1 Main Components, page 30
2 Ensure that the equipment is in good condition.
3 Check that the air inlet filters are
installed.
5.2

Placing the Vivo 2

WARNING!
Read the chapter 2.3 Environment — Warnings and Precautions, page 20 carefully to
make sure all conditions are met and considered.
1 Place the Vivo 2 on a solid, flat
surface. The Vivo 2 should be placed
lower than the patient in order to
prevent the device from falling on the
patient, as well as preventing condensed
water from reaching the patient.
Doc. 007229 D-3
Prepare the Vivo 2 for Use
User manual
59