Chapter 2 Part Names - Mitsubishi L Series User Manual

CHAPTER 2
The following table shows part names of the A/D converter module.
2)
3)
6)
1)
Number Name
1) Module joint levers
2) RUN LED (green)
3) ERR. LED (red)
4) ALM LED (red)
5) DIN rail hook
6) Terminal block
7) Terminal block cover
8) Serial number display
*1 Error Code List (
*2 Alarm Code List (
PART NAMES
1)
4)
7)
8)
Levers for connecting modules
Displays the operating status of the A/D converter module.
On: The module is operating normally.
Flashing: In the offset/gain setting mode
Off: The 5V power off or watchdog timer error has occurred.
Displays the errors and status of the A/D converter module.
On: an error has occurred except for error code: 112
Flashing: Error code: 112 has occurred.
Off: The module is operating normally.
Displays the alarm status of the A/D converter module.
On: Alarm (process alarm) is occurring
Flashing: Input signal error detection is occurring
Off: The module is operating normally.
A hook used to mount the module to a DIN rail
18-pin screw terminal block for connecting input signal lines of such as external devices
Covers for preventing electric shock while the power is on
Displays the serial number printed on the rating plate.
Page 159, Section 11.4)
Page 163, Section 11.5)

CHAPTER 2 PART NAMES

1)
5)
1)
Description
*1
*1
*2
*2
2
17