Table of Contents
Advertisement
CHAPTER 2
The section describes part names of the D/A converter module.
No.
Name
Station number setting
1)
switch
PART NAMES
*1
2)
3)
4)
*1
*1 Do not remove this seal because it is used for a maintenance purpose.
A rotary switch for the following setting and test.
• Station Number Setting (
• Offset/Gain Setting (
Page 68, Section 7.2)
• Unit Test (
Page 128, Section 11.5)
When operating the station number setting switch, use a slotted screwdriver with 3.5mm or less width of the
tip.
1)
7) 8)
5)
6)
Application
Page 45, Section 6.1)
CHAPTER 2 PART NAMES
19
2
Advertisement
Table of Contents
Troubleshooting
