Appendix 5.2 G(P).Offgan - Mitsubishi L Series User Manual

Appendix 5.2
G.OFFGAN
GP.OFFGAN
Internal device
Setting
data
Bit Word
⎯
S
(1) Setting data
Device
Un Start I/O number of module
Mode change
0: changed to the normal mode
1: changed to the offset/gain setting mode
S
When a value other than above is set, the mode is changed to the offset/gain setting
mode.
(2) Functions
This instruction switches the operation mode of the A/D converter module.
• Normal mode → offset/gain setting mode (Offset/gain setting mode flag (XA) is ON)
• Offset/gain setting mode → normal mode (Offset/gain setting mode flag (XA) is OFF)
● When the mode is switched from the offset/gain setting mode to the normal mode, Module READY (X0) turns from OFF
to ON.
Note that if a program includes the initial settings to be executed at ON of Module READY (X0), this instruction performs
the initial setting process.
● When the mode is switched from the offset/gain setting mode to the normal mode, the A/D converter module operates
under the previous operating condition.
(3) Errors
The instruction has no errors.
210
G(P).OFFGAN
Command
Command
J \
R, ZR
Bit Word
Description
G.OFFGAN
GP.OFFGAN
U \G Zn
⎯
Setting range
0 to FE
S
Un
S
Un
Constant
Others
K, H, $
Data type
BIN 16 bits
H
0, 1 BIN 16 bits