Mitsubishi L Series User Manual page 47

(3) Removal and installation of the terminal block
The following shows how to remove and install the terminal block.
(a) Removal procedure
Terminal block
mounting screw
(b) Installation procedure
Terminal block fixing hole
Terminal block
mounting screw
CHAPTER 6 INSTALLATION AND WIRING
1.
Open the terminal cover and loosen the terminal
block mounting screw.
2.
Using the terminal block fixing holes as a fulcrum,
remove the terminal block.
1.
Fully insert the projections on the top of the terminal
block into the terminal block fixing holes and press
the terminal block until it snaps into place.
2.
Open the terminal cover and tighten the terminal
block mounting screw.
6
45