(2) Clearing errors
You can clear an error by eliminating the cause of the error, and turning Error clear request (YF) OFF → ON →
OFF from "Device Monitor/Test".
When an error occurs in the A/D converter module with a start I/O number of 1
Ex.
"CPU monitor/test" screen
↓
"Device monitor" screen
↓
"Device test" screen
↓
1.
Use the
and
buttons to select "DEV MON/
TEST", and then confirm with the
2.
Set the device to Y and press the
3.
Use the
and
buttons to set the device to Y1F,
and then confirm with the
4.
Use the
and
buttons to switch ON/OFF. Press
the
button to set the value at the device test
OK
setting.
CHAPTER 9 DISPLAY UNIT
button.
OK
button.
OK
button.
OK
139
9