Mitsubishi L Series User Manual page 216

Device
CH3 User range settings gain value (L)
+30
S
CH3 User range settings gain value (H)
+31
S
CH4 User range settings offset value (L)
+32
S
CH4 User range settings offset value (H)
+33
S
CH4 User range settings gain value (L)
+34
S
CH4 User range settings gain value (H)
+35
S
*1 Configure the setting of Pass data classification setting
When the data is written to the area to be set by system, offset/gain setting value is not correctly read out.
(3) Functions
• This instruction reads out the offset/gain set value in the user range setting of the A/D converter module to
the CPU module.
• The interlock signal of G(P).OGLOAD includes a completion device
device
D
(a) Completion device
The device turns ON at the END processing for the scan where the G(P).OGLOAD instruction is completed,
and turns OFF at the next END processing.
(b) Completion status indication device
This device turns OFF → ON → OFF depending on the status of the G(P).OGLOAD instruction completion.
• Normal completion: the device is kept to be OFF.
• Error completion: the device turns ON at the END processing for the scan where the G(P).OGLOAD
instruction is completed, and turns OFF at the next END processing.
Program
G(P).OGLOAD
instruction
Completion device D
Completion status
indication device D +1
(4) Errors
The instruction has no errors.
214
Item
+1.
END END
processing processing
ON
OFF
OFF
OFF
Setting data
⎯
⎯
⎯
⎯
⎯
⎯
+2 only.
S
D
Execution completion of the
G(P).OGLOAD instruction
Setting range Set by
System
⎯
System
⎯
⎯ System
System
⎯
System
⎯
⎯ System
and a completion status indication
END END
processing processing
ON
ON: Execution failed
OFF: Execution succeeded
1 scan