Mitsubishi L Series User Manual page 220

Device
CH3 User range settings offset value (H)
+29
S
CH3 User range settings gain value (L)
+30
S
CH3 User range settings gain value (H)
+31
S
CH4 User range settings offset value (L)
+32
S
CH4 User range settings offset value (H)
+33
S
CH4 User range settings gain value (L)
+34
S
CH4 User range settings gain value (H)
+35
S
(3) Functions
• The offset/gain set value in user range setting stored in CPU module is restored to A/D converter module.
• There are two interlock signals of G(P).OGSTOR: a completion device
device
D
• The reference accuracy on restoration of offset/gain setting value is lowered three times or less of that of
before the restoration.
(a) Completion device
The device turns ON at the END processing for the scan where the G(P).OGSTOR instruction is completed,
and turns OFF at the next END processing.
(b) Completion status indication device
This device turns OFF → ON → OFF depending on the status of the G(P).OGSTOR instruction completion.
• Normal completion: the device is kept to be OFF.
• Error completion: the device turns ON at the END processing for the scan where the G(P).OGSTOR
instruction is completed, and turns OFF at the next END processing.
Program
G(P).OGSTOR
instruction
Completion device D
Completion status
indication device D +1
(4) Errors
In the following cases, an error occurs and error code is stored in completion status area
Error code
161
162
163
218
Item
+1.
END END
processing processing
ON
OFF
OFF
OFF
G(P).OGSTOR instruction is executed in offset/gain setting mode.
G(P).OGSTOR instruction is continuously executed.
• G(P).OGSTOR instruction is executed to the different model from the one to which G(P).OGLOAD
instruction is executed.
• G(P).OGSTOR instruction has been executed before the execution of G(P).OGLOAD instruction.
Setting data
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Execution completion of the
G(P).OGSTOR instruction
Description of operation error
Setting range Set by
⎯ System
⎯ System
⎯
System
⎯
System
⎯ System
⎯
System
⎯
System
and a completion status indication
D
END END
processing processing
ON
ON: Execution failed
OFF: Execution succeeded
1 scan
+1.
S