3.
Display the Network Configuration Setting screen and configure the setting as follows.
Project window
button
4.
Display the Auto Refresh setting screen for the A/D converter module (L60AD4) and configure the
setting as follows.
Project window
button
5.
Write the set parameter to the CPU module of the master station and reset the CPU module, or turn
off and then on the programmable controller power supply.
[Online]
[Write to PLC...]
[Parameter]
[Network Parameter]
[Parameter]
[Network Parameter]
or Power OFF
CHAPTER 10 PROGRAMMING
[Ethernet/CC IE/MELSECNET]
[Ethernet/CC IE/MELSECNET]
ON
10
151