Mitsubishi L Series User Manual page 101

(2) Logging procedure
(a) Use conditions of the logging function
To use the logging function, set as follows.
Conversion speed
Input signal error detection function
Input signal error detection extension function
(b) Starting logging and checking procedure of logging data
Logging data can also be checked without stopping logging. For details, refer to the following.
• When checking logging data without stopping logging (
Item
Start
Configure the logging facility.
Stop the logging operation.
Check the logging stop in CH
(Un\G1016 to Un\G1019).
Check and save the logging data.
The logging restarts.
End
Setting
80µs, or 1ms
Disable
Disable
Logging hold flag
Page 109, Section 8.14 (10))
CHAPTER 8 FUNCTIONS
Page 100, Section 8.14 (3)
Page 104, Section 8.14 (5)
Page 105, Section 8.14 (6)
Page 106, Section 8.14 (8)
Page 108, Section 8.14 (9)
99
8