Mitsubishi L Series User Manual page 15

• Instructions can be executed under the following conditions.
Execution condition Any time
Symbol No symbol
• The following devices can be used.
Internal device
Setting (system, user)
data
Bit Word
X, Y, M, L, T, ST, C, D,
Applicable SM, F, B,
W, SD,
SB, FX,
*1 SW, FD,
device
*2
FY
*1 For details on each device, refer to the following.
MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals)
*2 FX and FY can be used for bit data only, and FD for word data only.
*3 In the "Constant" and "Others" columns, a device(s) that can be set for each instruction is shown.
• The following data types can be used.
Data type
Bit Bit data or the start number of bit data
BIN 16-bit 16-bit binary data or the start number of word device
BIN 32-bit 32-bit binary data or the start number of double-word device
BCD 4-digit Four-digit binary-coded decimal data
BCD 8-digit Eight-digit binary-coded decimal data
Real number Floating-point data
Character string Character string data
Device name Device name data
During on
Link direct device
File J \
register
Bit
R, ZR
@
On the rising
edge
Intelligent
function module
device
Word
U \G
-
U \G
Description
On the falling
During off
edge
Index
Con-
Others
register
*3
stant
Zn
P, I, J, U,
D, X, DY,
Z K, H, E, $
N, BL, TR,
BL\S, V
*3
13