Mitsubishi L Series User Manual page 175

(3) Channel change request (YB)
Turn Channel change request (YB) OFF → ON → OFF to change a channel to perform the offset/gain setting.
For the timing of turning the signal OFF → ON → OFF, refer to the following.
• Channel change completed flag (XB) (
(4) Maximum value/minimum value reset request (YD)
Turn Maximum value/minimum value reset request (YD) OFF → ON → OFF to clear the maximum or minimum
values stored in CH Maximum value (Un\G30, Un\G32, Un\G34, Un\G36) and CH
Un\G33, Un\G35, Un\G37).
For the timing of turning the signal OFF → ON → OFF, refer to the following.
• Maximum value/minimum value reset completed flag (XD) (
(5) Error clear request (YF)
To clear Error flag (XF), Input signal error detection signal (XC), and Latest error code (Un\G19), turn Error clear
request (YF) OFF → ON → OFF.
For the timing of turning the signal OFF → ON → OFF, refer to the following.
• Input signal error detection signal (XC) (
• Error flag (XF) (
Page 167, Appendix 1.1)
Page 167, Appendix 1.1)
Page 167, Appendix 1.1)
Minimum value (Un\G31,
Page 167, Appendix 1.1)
APPENDICES
A
173