Checking And Clearing Errors - Mitsubishi L Series User Manual

9.4

Checking and Clearing Errors

You can check the errors that occurred in the A/D converter module, from the display unit. In addition, you can also
clear an error during its occurrence.
(1) Checking the error
You can check the error that occurred in the A/D converter module, by specifying Latest error code (Un\G19) from
"buffer memory monitor/test".
When an error occurs in the A/D converter module with a start I/O number of 1
Ex.
"Buffer memory monitor/test" screen
"Buffer memory address input format selection" screen
"Buffer memory address setting" screen
"Buffer memory monitor" screen
138
↓
↓
↓
1.
Press the button.
OK
2.
Use the and buttons to select "DEC" for the
input format of the buffer memory address, and then
confirm with the
OK
3.
Move the cursor using the
increment or decrement the value at the cursor, using
the and buttons, and set the value to
19.Confirm with the
4.
You can check the error that occurred, in the "Buffer
memory monitor" screen.
button.
and buttons, then
button.
OK