Mitsubishi L Series User Manual page 203

(53)CH Flow amount integration temporary stop flag (Un\G1364 to Un\G1367)
Flow amount integration temporary stop request status can be checked with this flag.
Flow amount integration temporary stop
request status
No temporary stop request
Temporary stopping
• While the flow amount integration function temporarily stops by CH
stop request (Un\G1356 to Un\G1359) being turned No request (0) → Temporary stop request (1), CH
Flow amount integration temporary stop flag (Un\G1364 to Un\G1367) is turned to Temporary stop request
(1).
• When the flow amount integration function restarts by CH
(Un\G1356 to Un\G1359) being turned Temporary stop request (1) → No request (0), CH
integration temporary stop flag (Un\G1364 to Un\G1367) is turned to No temporary stop request (1).
(54)CH Integrated flow amount clear request (Un\G1372 to Un\G1375)
When the flow amount integration function is enabled, the value of CH
Un\G1339) can be cleared to zero.
For details on the flow amount integration function, refer to the following.
• Flow amount integration function (
Integrated flow amount clear request
No request
Clear request
Integrated flow amount clear request (Un\G1372 to Un\G1375) is turned to No request (0) → Clear
When CH
request (1) while the flow amount integration function is operating, the value of CH
(Un\G1332 to Un\G1339) in the corresponding channel is cleared to zero.
(a) Default value
All channels are set to No request (0).
In the channel where a setting value other than the above is set, an error occurs. The error code is stored in Latest error
code (Un\G19), Error flag (XF) is turned to ON, and the value of CH
not cleared.
(55)CH Integrated flow amount clear flag (Un\G1380 to Un\G1383)
Integrated flow amount clear request status can be checked with this flag.
Integrated flow amount clear flag
No clear request
Cleared
• When CH Integrated flow amount clear request (Un\G1372 to Un\G1375) is turned No request (0) → Clear
request (1) and the value of CH
Integrated flow amount clear flag (Un\G1380 to Un\G1383) is turned to Cleared (1).
• When CH Integrated flow amount clear request (Un\G1372 to Un\G1375) is turned to Clear request (1) →
No request (0), CH
request (0).
Page 110, Section 8.15)
Integrated flow amount (Un\G1332 to Un\G1339) is cleared, CH
Integrated flow amount clear flag (Un\G1380 to Un\G1383) is turned to No clear
Stored value
0
1
Flow amount integration temporary
Flow amount integration temporary stop request
Integrated flow amount (Un\G1332 to
Setting value
0
1
Integrated flow amount
Integrated flow amount (Un\G1332 to Un\G1339) is
Setting value
0
1
APPENDICES
A
Flow amount
201