Mitsubishi L Series User Manual page 178

(5) CH Digital output value (Un\G11 to Un\G14)
The A/D-converted digital output value is stored as a signed 16-bit binary.
(a) Updating cycle
When performing the average processing, the value is updated in each specified averaging processing cycle.
When the average processing is not performed, the value is updated in each sampling cycle.
(6) Latest error code (Un\G19)
Error codes or alarm codes detected in the A/D converter module are stored.
For details on error code and alarm code, refer to the following.
• Error code list (
• Alarm code list (
(a) Clearing an error
Turn OFF → ON → OFF Error clear request (YF).
(7) Setting range (Un\G20)
The setting content for input range can be checked.
Input range cannot be changed in Setting range (Un\G20).
For changing the setting, refer to the following.
● Switch setting (
176
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5
Sign bit
1: Negative
2: Positive
Page 159, Section 11.4)
Page 163, Section 11.5)
b15 to b12 b11 to
CH4 CH3
Input range
4 to 20mA
0 to 20mA
1 to 5V
0 to 5V
-10 to 10V
0 to 10V
4 to 20mA (Extended mode)
1 to 5V (Extended mode)
User range setting
Page 49, Section 7.2)
b4 b3 b2
Data section
b8 b7 to b4 b3
CH2
b1 b0
to b0
CH1
Setting value
0
H
1
H
2
H
3
H
4
H
5
H
A
H
B
H
F
H