Mitsubishi L Series User Manual page 213

(4) Program example
The following shows the program of the A/D converter module, installed in I/O number X/Y10 to X/Y1F, with the
following conditions:
• turning ON M10 switches the operation mode to the offset/gain setting mode, and
• turning OFF M10 restores the operation mode to the normal mode.
Switches to the offset/gain setting mode.
Switches to the normal mode.
Processing in offset/gain setting mode
Processing in normal mode
APPENDICES
Stores the setting data of the dedicated
instruction (G.OFFGAN) in D1.
Dedicated instruction (G.OFFGAN)
Stores the setting data of the dedicated
instruction (G.OFFGAN) in D1.
Dedicated instruction (G.OFFGAN)
211
A