Digital Clipping Function - Mitsubishi L Series User Manual

8.12

Digital Clipping Function

The range of the scaling value (digital operation value) for voltage or current over the input range is fixed between the
maximum digital output value and the minimum digital output value.
(1) Concept of digital clipping setting
The following table lists the output range of the scaling value (digital operation value) when the digital clipping
function is enabled for each range.
Input range
4 to 20mA
0 to 20mA
1 to 5V
0 to 5V
0 to 10V
-10 to 10V
User range setting
4 to 20mA (Extended mode)
1 to 5V (Extended mode)
(2) Setting procedure
1.
Set "A/D conversion enable/disable setting" to "0: Enable".
Project window
2.
Set "Digital clipping function enable/disable setting" to "0: Enable" .
90
Output range of the scaling value (digital operation value)
Digital clipping function enabled
0 to 20000
-20000 to 20000
-5000 to 22500
[Intelligent Function Module]
Digital clipping function disabled
-480 to 20479
-20480 to 20479
-5480 to 22979
module name [Parameter]