Technical data • Complete system
2.3 Electrical characteristics
2.3.1 +24 VDC voltage supply
The 3-pin male connector required for the power supply interface is not included in delivery. It can be ordered from
B&R using model number 0TB103.9 (screw clamps) or 0TB103.91 (cage clamps).
The pinout is listed in the following table. The supply voltage is protected internally by a soldered fuse (15 A, fast-
acting) to prevent damage to the device in the event of an overload (fuse replacement necessary) or if the voltage
supply is connected incorrectly (reverse polarity protection -> fuse replacement not necessary). The device must
be returned to B&R for repairs if the fuse is blown in the event of an error.
Protected against reverse polarity
Pin
1
2
3
Model number
Short description
Terminal blocks
0TB103.9
Male connector 24 V 5.08 3-pin screw clamps
0TB103.91
Male connector 24 V 5.08 3-pin cage clamps
Electrical characteristics
Nominal voltage
Nominal current
Starting current
Electrical isolation
Uninterruptible power supply
36
+24 VDC power supply
Description
+
Functional ground
-
Table 30: +24 VDC voltage supply connection
24 VDC ±25%
3.5 A
Typ. 6 A; max. 10 A for <300 μs
Yes
No
3-pin male power supply connector
+24 VDC power supply
Panel PC 2100 user's manual V1.11