B&R Panel PC 2100 User Manual page 61

2.6.2.5 15" devices
The cutout tolerance for PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 systems is ±0.5 mm.
The cutout tolerance for the AP1000 is +0 mm / -0.5 mm.
PP100/200/300/400 PP500
PP100/200/300/400
PP500
15" Automation Panel 1000 and Power Panel 500 devices are not 100% mounting compatible with Power Panel
100/200/300/400, Automation Panel 900, Panel PC 700 and Panel PC 800 devices in the Vertical1 format. Au-
tomation Panel 1000 and Power Panel 500 devices require a cutout that is 0.5 mm higher (top and bottom edge).
The larger cutout can be used for all devices under certain conditions:
• When mounting, make sure that the PP100/200, PP300/400, AP900, PPC700 and PPC800 devices are
placed and mounted as close to the center of the cutout as possible. Failure to do so can prevent the
retaining clips from holding firmly, which means that a solid seal is no longer guaranteed by the gasket
(IP65).
PP100/200/300/400
PP500
15" Power Panel 500 devices are not 100% mounting compatible with Power Panel 100/200/300/400, Automation
Panel 900 and Panel PC 700 devices in the Vertical1 format. The Power Panel 500 devices require a cutout that
is 0.5 mm higher (top and bottom edge).
The larger cutout can be used for all devices under certain conditions:
• When mounting, make sure that the PP100/200, PP300/400, AP900 and PPC700 devices are placed and
mounted as close to the center of the cutout as possible. Failure to do so can prevent the retaining clips
from holding firmly, which means that a solid seal is no longer guaranteed by the gasket (IP65).
Panel PC 2100 user's manual V1.11
10
435 x 330
415 x 312
415 x 313
Outer contour of device
Cutout for PP100/200/300/400/AP900/PPC700/PPC800 device
Cutout for PP500/AP1000 device
Figure 36: Mounting compatibility - 15" device - Horizontal1
435 x 430
10
415 x 412
415 x 413
Outer contour of device
Cutout for PP100/200/300/400/AP900/PPC700 device
Cutout for PP500 device
Figure 37: Mounting compatibility - 15" device - Vertical1
Technical data • Complete system
10
8.5 PP500, AP1000
9 PP100/200/300/400, AP900, PPC700, PPC800
AP900/PPC700 AP1000
AP900 AP1000
9 PP100/200/300/400, AP900, PPC700, PPC800
8.5 PP500, AP1000
10
8.5 PP500
9 PP100/200/300/400/AP900/PPC700
AP900
9 PP100/200/300/400/AP900/PPC700
8.5 PP500
PPC800
61